500 kW Open Type Natural Gas Generator
500 kW open type natural gas generator: 450 kW continuous, 40.1% efficiency. For large plants and hospitals with an engine room; installed by Aden Solar.
- Rated power
- 500 kW
- Apparent power
- 625 kVA
- Continuous power
- 450 kW
- Generating efficiency
- 40.1%
- Step load acceptance
- ±250 kW
- Frequency
- 50 / 60 Hz
- Voltage
- 0.4 / 0.6 / 10.5 kV
- Weight
- 5,500 kg
- Dimensions (L×W×H)
- 3740×1870×2240 mm
The 500 kW Open Type Natural Gas Generator is a generator set delivering 625 kVA apparent power and 450 kW continuous power, with 40.1% generating efficiency at full load. It has the highest efficiency of the open type models in the range and suits large factories, hospitals and sites with a steady heat demand that want cogeneration, provided they have an engine room. The set measures 3740×1870×2240 mm and weighs 5,500 kg.
Key features
- 625 kVA apparent power, 450 kW continuous power
- 40.1% generating efficiency at full load
- ±250 kW step load acceptance
- 50 / 60 Hz; 0.4 kV low voltage plus 0.6 kV and 10.5 kV medium voltage output
- Exhaust and jacket water heat can be recovered for boiler feed water preheating, hot water or process heat
Where it is used
- Large production plants in industrial zones
- Hospitals and campuses that need uninterrupted power
- Sites with constant heat demand such as textile dye houses, dairies and food plants
- Prime power where grid capacity falls short
Why does efficiency matter?
Generating efficiency shows how much of the gas burned turns into electricity. At 40.1%, the same volume of gas yields more kWh, and if the generator runs long hours that difference goes straight into operating cost.
Installation with Aden Solar
During the site survey Aden Solar plans the foundation and access route for moving the 5,500 kg set into the engine room. We provide a turnkey service covering gas, exhaust and heat recovery lines, low or medium voltage connection, transfer panel, commissioning and scheduled maintenance.
Frequently asked questions
How many kVA is a 500 kW generator?
A 500 kW generator has 625 kVA of apparent power. This set is sized to deliver 450 kW in continuous operation.
Should I choose 0.4 kV or 10.5 kV output?
If the generator feeds the site low voltage switchboard directly, 0.4 kV is enough. If the site takes power at medium voltage through its own transformer, a 10.5 kV output makes it easier to connect on the medium voltage side.
Can a 500 kW generator serve as hospital backup power?
Yes. With a transfer panel it can be set to start automatically when the grid fails. The list of critical loads and their switching order is agreed during the survey.
Open type or containerised 500 kW?
With an engine room available, the open type is more compact and lighter. With no indoor space, the containerised model of the same power is installed outdoors.