TommaTech 15 kW 1000VDC 3-Phase / 380VAC Irrigation Pump Inverter
TommaTech 15 kW irrigation pump inverter: 1000 VDC input, 3-phase 380 VAC output, no battery or grid needed. Turnkey solar irrigation by Aden Solar.
- Nominal output
- 15 kW
- Maximum DC input
- 1000 VDC
- AC output
- 3-phase / 380 VAC
- MPPT range
- Wide
- Warranty
- 2 years
The TommaTech 15 kW irrigation pump inverter converts DC from the solar array into three-phase 380 VAC and drives the irrigation pump directly. It moves the cost of agricultural irrigation onto solar, removing the need for a grid connection or diesel.
Key features
- 15 kW nominal output, 3-phase / 380 VAC.
- 1000 VDC maximum DC input: longer panel strings and lower cable loss.
- Wide MPPT range: it adapts pump speed as irradiance changes, so water still flows morning and evening.
- No grid connection needed: it runs in the field without transformer or connection costs.
- Dry-run and water level protection guard the pump against damage.
Where it is used
- Agricultural irrigation and submersible pump systems
- Greenhouses and drip irrigation
- Water supply on livestock farms
- Wells on land the grid does not reach
Installation with Aden Solar
Aden Solar sizes the array by measuring your pump rating, well depth and daily water requirement. We deliver turnkey installation: free site survey, pump and drive compatibility check, mounting structure, cabling, installation and commissioning.
Frequently asked questions
Does a solar irrigation system need batteries?
No. The pump runs while the sun is up and water is pumped into a tank or pond, so energy is stored as water rather than in batteries. That makes the system cheaper and lower-maintenance.
Which pumps will a 15 kW inverter drive?
Three-phase 380 V submersible or centrifugal pumps up to 15 kW. The pump's rated power and starting current are checked during the survey.
Does the pump run on cloudy days?
Thanks to the wide MPPT range it keeps pumping at reduced speed in low irradiance; flow drops but the system does not stop.