Orbit 6.2 kW Pure Sine Wave Off-Grid Inverter – 12 in Parallel
Orbit 6.2 kW pure sine wave off-grid inverter: up to 12 in parallel, 120 A MPPT, 60–500 V PV input, up to 94% efficiency. Turnkey with Aden Solar.
Orbit Enerji dealer
- Rated power
- 6.2 kW
- Type
- Off-grid inverter
- Output waveform
- Pure sine wave
- Battery voltage
- 48 V DC
- PV input range
- 60–500 V DC
- MPPT charge current
- 120 A
- Parallel operation
- Up to 12 units
- Peak efficiency
- Up to 94%
- Communication
- RS232 / RS485, Wi-Fi monitoring
- Operating modes
- UTL / SOL / SBU / SUB
The Orbit 6.2 kW Pure Sine Wave Off-Grid Inverter is a parallel-capable inverter for solar systems with 48 V batteries. With a 60–500 V DC PV input range, 120 A MPPT charge current and up to 94% efficiency, it powers homes and businesses independently of the grid, and up to 12 units can be paralleled as needs grow.
Key features
- Up to 12 units can run in parallel to scale up total power.
- Wide 60–500 V DC PV input range and 120 A MPPT charge current.
- Pure sine wave output: grid-quality power for sensitive household and industrial devices.
- RS232 / RS485 ports and Wi-Fi remote monitoring support.
- Can power loads directly from the solar panels.
- Up to 94% inverter efficiency for low energy losses.
- Overload, short-circuit, over-current and over-temperature protection.
- UTL, SOL, SBU and SUB source-priority modes.
Where it is used
- Off-grid country houses, cabins and farms
- Agricultural irrigation and pump systems
- Homes and businesses with frequent outages
- Building sites, warehouses and remote sites
Installation with Aden Solar
Aden Solar sizes the inverter, the panel strings and the battery bank from your consumption. We deliver turnkey off-grid installation: free site survey, panel and battery selection, mounting, wiring, commissioning and after-sales support. We are your contact for warranty and technical support.
Frequently asked questions
What is an off-grid inverter?
An off-grid inverter converts direct current from solar panels and batteries into the 230 V alternating current used at home, and runs without the grid. Where grid or generator power exists, it can use it as a backup source.
How does parallel operation work?
Up to 12 units of the same model work together to add up their power; two 6.2 kW units, for example, deliver 12.4 kW. Aden Solar handles the parallel wiring and settings during installation.
Why does a pure sine wave inverter matter?
A pure sine wave inverter produces the same waveform as the grid. Fridges, pumps, computers and sensitive electronics run smoothly and quietly, and motor loads do not overheat.
What do the SBU, SUB, SOL and UTL modes mean?
They set which source is used first. SBU uses solar, then battery, then grid; SUB goes from solar to grid before the battery; SOL gives priority to solar and UTL to the grid.
